Choose whether Google may use analytics cookies and measure site interactions. Basic
measurement without analytics cookies is on by default. You can change your choice from the
footer.
Essential
Always on
Required to remember site preferences that you choose to save.
Analytics
Allows analytics cookies and site interaction measurement. Basic Google page measurement
without analytics cookies continues when this is off. Household calculator inputs are
not sent. You can block this Google Analytics measurement on the Privacy Policy page.
May fit: Selected 120 V loads after checking running watts and startup demand.
Consider another setup: 240 V loads, over 2,000 W output, or battery-expansion needs.
Manufacturer research; no hands-on testing. Source records checked on 2026-10-04.
Compare Explorer 1000 v2 and SOLIX C1000 Gen 2 by continuous AC output, carrying weight, solar input ceiling, and UPS transfer limits, with BLUETTI AC180 as an older reference.
How the options differ
Different households can reach different answers
We compare the US models using their manufacturer specifications and manuals, then interpret the differences for household backup planning. We have not tested either unit. Capacity is nominal battery energy, not measured AC output. We do not rank by commission, current price, star ratings, or advertised boosted-power modes. Per-field source dates appear in the specification table.
Best fit by need
You need a higher continuous AC ceiling (up to 2,000 W): Examine Anker SOLIX C1000 Gen 2
Its 2,000 W continuous AC rating and 600 W solar-input ceiling exceed the Explorer 1000 v2 on paper, though battery chemistry and warranty term require verification on the exact listing.
You prioritize the lowest carrying weight (23.8 lb) and documented LiFePO4 chemistry: Examine Jackery Explorer 1000 v2
If your simultaneous running loads stay comfortably under 1,500 W, the Explorer 1000 v2 documents LiFePO4 chemistry, a 3,000 W surge figure, and a 23.8 lb weight.
You want a heavier older alternative with 1,152 Wh nominal capacity: Keep BLUETTI AC180 on the shortlist
AC180 provides 1,152 Wh nominal capacity and 1,800 W continuous output, but weighs 35.27 lb.
Documented specifications and the older alternative
Manufacturer specifications, not hands-on measurements. Each figure includes its source and
check date. “Not documented” means the reviewed record does not establish the feature.
Compare columns. Swipe or scroll horizontally on smaller screens.
Documented specifications and the older alternative. Manufacturer research only.
Not documentedManufacturer says external batteries can charge the AC180 in Power Bank Mode; its US product FAQ says this is not capacity expansion, so no expanded capacity is counted.Source · checked 2026-10-04 (opens in a new tab)
Criterion-by-criterion record
Compare columns. Swipe or scroll horizontally on smaller screens.
Criterion
Why it matters
Jackery Explorer 1000 v2
Anker SOLIX C1000 Gen 2
Continuous AC output and capacity
Simultaneous appliance watts must fit within the continuous AC limit regardless of battery watt-hours.
1,070 Wh nominal LiFePO4 battery with 1,500 W continuous AC output across three 120 V receptacles.
1,024 Wh nominal battery with 2,000 W continuous AC output across three 120 V receptacles. Chemistry is left unverified in the reviewed US primary sources.
Solar input ceiling
Determines the maximum panel wattage the charge controller can accept under ideal sun.
400 W documented solar-input ceiling in the US manual.
600 W documented solar-input ceiling on the US product specification page.
Carrying weight and expansion
Lighter units are easier to stage upstairs or move between rooms, while fixed capacity limits multi-day expansion.
About 23.8 lb (10.8 kg). Jackery states this model does not support expansion battery packs.
About 24.9 lb. The US manufacturer comparison table lists expandable capacity as No.
Transfer time and surge caveats
Connected electronics and compressors have strict interruption and startup requirements.
20 ms battery-mode switching (not a 0 ms UPS) and 3,000 W instantaneous surge rating.
10 ms UPS switching. Manual describes SurgePad up to 2,400 W for heat-generating loads rather than a general motor-start rating.
Before you order
Match the unit to your actual load
Write down simultaneous running watts, the largest startup demand, and measured daily
watt-hours. A larger Wh number does not raise the output limit.
Check the exact US model and bundle. Panels, expansion batteries, and charging cables may
be sold separately.
Read the seller, return, and warranty terms for the listing you select. A manufacturer
specification is not proof that every marketplace bundle is equivalent.
Plan a test with your actual equipment before relying on it. Neither a brief UPS transfer
time nor an advertised runtime guarantees compatibility with critical equipment.
The Explorer 1000 v2 is a 1,070 Wh, 1,500 W portable station for selected 120 V essentials. Its current U.S. support record specifies 400 W maximum solar input, no battery-pack expansion, and UPS switching within 20 ms.
Nominal capacity
1,070 Wh
Continuous AC output
1,500 W
Base-unit weight
23.8 lb
May fit when
Selected 120 V loads whose running and startup requirements fit the station's ratings.
Households that can recharge the station between interruptions or have a compatible solar plan within the 400 W input limit.
Readers comparing about one kilowatt-hour of base capacity with other portable stations.
Consider another setup when
Loads requiring 240 V, more than 1,500 W continuous output, or a verified battery expansion option.
Equipment that cannot tolerate a UPS transfer interval of up to 20 ms.
Long outages where measured daily energy exceeds the station's realistic delivered capacity and no recharge plan is available.
Source records checked on 2026-10-04 for the displayed figures. They are not hands-on
test results. Confirm the exact model, connections, and load requirements before buying.
The SOLIX C1000 Gen 2 pairs 1,024 Wh of listed capacity with 2,000 W rated 120 V output and up to 600 W solar input. It is heavier and slightly lower-capacity than the Explorer 1000 v2, with a manufacturer-listed 10 ms UPS transfer figure and no expansion capacity in Anker's comparison table.
Nominal capacity
1,024 Wh
Continuous AC output
2,000 W
Base-unit weight
24.9 lb
May fit when
Selected 120 V loads that benefit from the documented 2,000 W rated output after startup requirements are checked.
Households prioritizing a higher solar-input ceiling and 10 ms UPS specification in this capacity class.
Readers comparing base capacity, weight, footprint, output, and interruption tolerance side by side.
Consider another setup when
240 V loads, needs above the 2,000 W rated AC output, or a plan that depends on additional battery capacity.
Precision or strict-voltage equipment that is not supported by the manual's SurgePad feature.
Households unable to handle a 24.9 lb station or support the charging and storage setup.
Source records checked on 2026-10-04 for the displayed figures. They are not hands-on
test results. Confirm the exact model, connections, and load requirements before buying.
The AC180 is a roughly one-kilowatt-hour, 120 V portable battery with 1,800 W continuous output and a documented UPS switching figure of 20 ms or less. Its slightly higher nominal capacity than the DELTA 2 comes with a heavier listed base-unit weight and no directly attached expansion capacity verified in this source record. It remains an older-model alternative to Elite 100 V2.