Choose whether Google may use analytics cookies and measure site interactions. Basic
measurement without analytics cookies is on by default. You can change your choice from the
footer.
Essential
Always on
Required to remember site preferences that you choose to save.
Analytics
Allows analytics cookies and site interaction measurement. Basic Google page measurement
without analytics cookies continues when this is off. Household calculator inputs are
not sent. You can block this Google Analytics measurement on the Privacy Policy page.
May fit: Selected 120 V loads after checking running watts and startup demand.
Consider another setup: 240 V loads, over 2,000 W output, or battery-expansion needs.
Manufacturer research; no hands-on testing. Source records checked on 2026-10-04.
Compare Elite 100 V2 and SOLIX C1000 Gen 2 by solar charging ceiling (1,000 W vs 600 W), continuous AC output (1,800 W vs 2,000 W), and weight, with EcoFlow DELTA 3 as a third reference.
How the options differ
Different households can reach different answers
We compare the US models using their manufacturer specifications and manuals, then interpret the differences for household backup planning. We have not tested either unit. Capacity is nominal battery energy, not measured AC output. We do not rank by commission, current price, star ratings, or advertised boosted-power modes. Per-field source dates appear in the specification table.
Best fit by need
You plan to recharge from a larger 600 W–1,000 W solar array: Examine BLUETTI Elite 100 V2
Its 1,000 W solar input ceiling, documented LiFePO4 chemistry, and 5-year warranty make it the stronger candidate when solar recovery speed is the bottleneck.
You need up to 2,000 W continuous 120 V AC output: Examine Anker SOLIX C1000 Gen 2
Its 2,000 W continuous rating gives an extra 200 W of running headroom over 1,800 W stations, provided you confirm chemistry and warranty terms on the exact listing.
You want six AC outlets and EcoFlow extra-battery options: Keep EcoFlow DELTA 3 on the shortlist
DELTA 3 matches the 1,024 Wh capacity and 10 ms transfer time while providing six 120 V outlets.
Documented specifications and the older alternative
Manufacturer specifications, not hands-on measurements. Each figure includes its source and
check date. “Not documented” means the reviewed record does not establish the feature.
Compare columns. Swipe or scroll horizontally on smaller screens.
Documented specifications and the older alternative. Manufacturer research only.
500 WExact-model manual (EF-DL-H10-3) specifies 500 W maximum; EcoFlow's product page mixes series-level DELTA 3 Plus details, so confirm the model label before applying this value.Source · checked 2026-10-04 (opens in a new tab)
US AC voltage Must match the appliance and connection requirements.
Expanded capacity Requires the manufacturer's compatible extra batteries, sold separately.
Not documentedManual documents solar and DC charging inputs, not directly attached battery-capacity expansion; separate Charger/B300K bundles do not establish an expansion ceiling.Source · checked 2026-10-04 (opens in a new tab)
Not documentedManufacturer lists compatible extra batteries and markets expansion up to 5 kWh, but this record does not establish an exact Wh ceiling for the standalone DELTA 3 configuration.Source · checked 2026-10-04 (opens in a new tab)
Criterion-by-criterion record
Compare columns. Swipe or scroll horizontally on smaller screens.
Criterion
Why it matters
BLUETTI Elite 100 V2
Anker SOLIX C1000 Gen 2
Solar charging ceiling
Multi-day outages rely on how much panel wattage the charge controller can accept during limited midday sun.
1,000 W documented solar-input ceiling (12–60 V, 20 A max) in the US manual.
600 W documented solar-input ceiling on the US specification page.
Continuous AC output and surge documentation
High-draw kitchen or tool loads require verified continuous watts rather than resistive-only boost modes.
1,800 W continuous AC output and a separate 3,600 W surge figure in the US technical table.
2,000 W continuous AC output across three AC ports. Manual describes SurgePad up to 2,400 W for heat-generating loads rather than a general motor-start surge figure.
Battery documentation and weight
Both sit near 25 lb and 1,024 Wh, but primary-source documentation completeness differs.
1,024 Wh LiFePO4 battery, 25.3 lb approximate weight, and 5-year listed US warranty.
1,024 Wh nominal battery and 24.9 lb listed weight; exact chemistry and warranty term were not verified in the reviewed US primary sources.
UPS transfer behavior
Both document 10 ms switchover for pass-through 120 V loads, which still requires testing with sensitive electronics.
10 ms or less documented UPS switchover in the US manual.
10 ms documented UPS switching in the US user guide.
Before you order
Match the unit to your actual load
Write down simultaneous running watts, the largest startup demand, and measured daily
watt-hours. A larger Wh number does not raise the output limit.
Check the exact US model and bundle. Panels, expansion batteries, and charging cables may
be sold separately.
Read the seller, return, and warranty terms for the listing you select. A manufacturer
specification is not proof that every marketplace bundle is equivalent.
Plan a test with your actual equipment before relying on it. Neither a brief UPS transfer
time nor an advertised runtime guarantees compatibility with critical equipment.
The Elite 100 V2 combines a 1,024 Wh battery and 1,800 W AC output with a documented 1,000 W solar-input ceiling. Its lower listed weight makes it worth comparing with the older AC180 when carrying and solar charging matter.
Nominal capacity
1,024 Wh
Continuous AC output
1,800 W
Base-unit weight
25.3 lb
May fit when
Selected 120 V essentials with verified running and startup requirements.
A household comparing carrying weight against the older AC180.
A compatible solar setup that can make practical use of the documented input range.
Consider another setup when
240 V loads or a whole-home installation requirement.
A plan depending on directly attached battery expansion that is not documented in this record.
More base energy if your loads cannot fit within a realistic one-kilowatt-hour plan.
Source records checked on 2026-10-04 for the displayed figures. They are not hands-on
test results. Confirm the exact model, connections, and load requirements before buying.
The SOLIX C1000 Gen 2 pairs 1,024 Wh of listed capacity with 2,000 W rated 120 V output and up to 600 W solar input. It is heavier and slightly lower-capacity than the Explorer 1000 v2, with a manufacturer-listed 10 ms UPS transfer figure and no expansion capacity in Anker's comparison table.
Nominal capacity
1,024 Wh
Continuous AC output
2,000 W
Base-unit weight
24.9 lb
May fit when
Selected 120 V loads that benefit from the documented 2,000 W rated output after startup requirements are checked.
Households prioritizing a higher solar-input ceiling and 10 ms UPS specification in this capacity class.
Readers comparing base capacity, weight, footprint, output, and interruption tolerance side by side.
Consider another setup when
240 V loads, needs above the 2,000 W rated AC output, or a plan that depends on additional battery capacity.
Precision or strict-voltage equipment that is not supported by the manual's SurgePad feature.
Households unable to handle a 24.9 lb station or support the charging and storage setup.
Source records checked on 2026-10-04 for the displayed figures. They are not hands-on
test results. Confirm the exact model, connections, and load requirements before buying.
The base DELTA 3 is a 1,024 Wh, 1,800 W portable station for selected 120 V essentials. Start with the exact model: DELTA 3, DELTA 3 Plus, and other variants do not share every charging specification.