Calculators Water & plumbing defense

Which smart water shutoff valve and leak sensor count fits my plumbing?

The Quick Answer: Choosing the wrong automatic water valve can lead to seized turbine impellers in hard water (>12 gpg / 205 ppm), unpowered valves that remain open during winter storm blackouts, or lease violations for renters. Select your five household plumbing parameters below to identify a compatible valve architecture and calculate your floor leak sensor count.

Configure your main shutoff and wet zones

Compatible Valve Architecture

YoLink FlowSmart All-in-One Ultrasonic

Point Leak Sensors Needed 10 Sensors

Plan first. Buy what is missing.

Compare spot leak sensors and sine-wave UPS backup for water-monitoring hubs

Check your existing main shutoff valve and wet-zone count first. These documented examples cover spot leak detection and gateway battery backup; they are not selected from your calculator answers.

100 dB Alarm volume

Check first: A mains-powered or monitored system if you need alerts that do not depend on home Wi-Fi.

More specifications & fit

A three-pack Wi-Fi water leak system listing a 2.4 GHz gateway, dual top and bottom probes, IP66 sensor housings, a buzzer up to 100 dB, and AAA batteries with low-battery app alerts.

Connectivity
2.4 GHz Wi-Fi gateway connects to household router for push notifications and email alerts
Sensor probes
Dual top and bottom brass sensing probes detect pooling water underneath and dripping water from above

A mains-powered or monitored system if you need alerts that do not depend on home Wi-Fi.

Read the fit and limitations
1,500 VA Rated apparent power (VA)

Workstation UPS · 1,500 VA / 1,000 W

CyberPower CP1500PFCLCD

Maximum real output (W)
1,000 W

Check first: A setup needing medical/life-critical support, loads above 1000 W, or settled battery-service instructions.

More specifications & fit

A 1500 VA / 1000 W sine-wave UPS with six battery-backed and six surge-only outlets for selected compatible electronics.

A setup needing medical/life-critical support, loads above 1000 W, or settled battery-service instructions.

Read the fit and limitations
5,100 GPH Primary pump capacity

Check first: Expecting a turn-key kit with battery included — you must separately purchase a 12 V deep-cycle AGM or sealed marine battery (75 Ah–100 Ah).

More specifications & fit

A pre-assembled 1/2 HP cast-iron primary AC sump pump (up to 5,100 GPH at 0 ft head) paired with a 12 V DC battery backup pump (up to 2,900 GPH) and dual check valves for drop-in basin defense.

System assembly
Pre-assembled with dual check valves for drop-in 15-minute basement basin installation

Expecting a turn-key kit with battery included — you must separately purchase a 12 V deep-cycle AGM or sealed marine battery (75 Ah–100 Ah).

Read the fit and limitations

Keep your plan useful.

Get occasional preparedness updates. Your calculator inputs and results stay on this device; this signs you up for the newsletter.

Preparedness by email

Sign up for planning updates

Kit provides this form and receives the details you choose to submit. Review its fields and privacy information before signing up.

Loading the sign-up form from Kit.

Combine main-line shutoff with point-of-leak detection

Whole-home ultrasonic flow meters and floor-level moisture pucks solve different failure modes. Flow meters stop high-volume pipe bursts and running fixtures, while wireless floor sensors catch zero-pressure drain leaks and water-heater pan drips before drywall wicks water.

  1. Verify whether your existing main shutoff is a smooth quarter-turn ball valve or a multi-turn gate/globe valve before ordering an actuator.
  2. Count every pressurized appliance and non-pressurized drain trap: toilets, vanity traps, kitchen sink, dishwasher toe-kick, refrigerator icemaker line, washing machine hoses, water heater pan, and HVAC condensate pan.
  3. Test local blackout shutoff by unplugging your Wi-Fi router and placing a damp paper towel across a paired floor sensor.

Common questions

Why does hard water affect automatic water shutoff valves?

Inline valves that rely on a spinning mechanical turbine impeller can accumulate calcium and magnesium scale in water above 12 grains per gallon (gpg / 205 ppm). Solid-state ultrasonic flow tubes and exterior clamp-on quarter-turn actuators avoid moving parts inside the water stream.

Will a smart water valve close during a power and internet outage?

Only if the actuator has internal battery power or a dedicated UPS and pairs directly to leak probes without cloud routing. 915 MHz LoRa Control-D2D systems can trigger a battery-powered valve locally even when Wi-Fi and grid power are down.

Why place two floor leak sensors in each bathroom?

Main-line flow meters detect pressurized pipe leaks but frequently miss slow toilet wax-ring seepage or weeping sink P-traps. Placing one sensor behind the toilet supply line and one inside the vanity cabinet covers non-pressurized drain and seal failures.