Manufacturer research Specifications checked 2026-11-08 US model

Wayne WSS30VN Primary & Backup Sump Pump System

A pre-assembled 1/2 HP cast-iron primary AC sump pump (up to 5,100 GPH at 0 ft head) paired with a 12 V DC battery backup pump (up to 2,900 GPH) and dual check valves for drop-in basin defense.

System assembly
Pre-assembled with dual check valves for drop-in 15-minute basement basin installation
See all specifications and sources

Is it right for your household?

Where it fits

Basements with recurring groundwater intrusion where thunderstorm blackouts knock out standard AC-only sump pumps.

When to consider another option

Expecting a turn-key kit with battery included — you must separately purchase a 12 V deep-cycle AGM or sealed marine battery (75 Ah–100 Ah).

More fit considerations

Other situations to consider

  • Homeowners replacing an aging standalone pump who want pre-plumbed dual check valves for straightforward drop-in replacement.
  • Systems needing audible alerts and LED battery/pump status diagnostics in unfinished basements.

Other reasons to choose a different setup

  • Narrow sump pits below manufacturer basin clearance specs where dual floats cannot swing freely without hanging.
  • Neglecting quarterly float-switch and terminal-voltage tests; a dead AGM battery defeats the DC backup pump.

Manufacturer specification record · No hands-on testing · Source records checked on 2026-11-08

Budget separately for a 75 Ah–100 Ah deep-cycle AGM battery

Wayne lists up to 5,100 GPH on the 1/2 HP primary AC pump (3,840 GPH at 10 ft lift) and up to 2,900 GPH on the 12 V DC auxiliary pump, but ships the pump combination without a battery. Pair it with a maintenance-free 75 Ah–100 Ah deep-cycle AGM marine battery inside an acid-resistant battery box.

Test dual float switches and inspect check valves seasonally

Debris inside a storm sump pit can jam a primary or backup float arm against the pit wall. Unplug the primary pump each quarter, verify the 12 V backup engages cleanly on float lift, and confirm the audible alarm and dual check valves seal properly without backflow hammer.

Specifications & sources

These are manufacturer specifications, not independent performance measurements. Source records checked on 2026-11-08. We have not tested this model hands-on.

Primary pump capacity

5,100 GPH

1/2 HP primary cast iron submersible pump moves up to 5,100 GPH at 0 ft head (3,840 GPH at 10 ft lift).

Checked 2026-11-08. Source for Primary pump capacity (opens in a new tab)

Backup pump capacity

2,900 GPH

12V DC auxiliary backup pump moves up to 2,900 GPH during utility outages or extreme storm surges.

Checked 2026-11-08. Source for Backup pump capacity (opens in a new tab)

System assembly

Pre-assembled with dual check valves for drop-in 15-minute basement basin installation

Checked 2026-11-08. Source for System assembly (opens in a new tab)

Alarm system

Smart audible alarm alert with visual LED diagnostics for power, battery charge, and pump cycling status

Checked 2026-11-08. Source for Alarm system (opens in a new tab)

Battery compatibility

Compatible with 12V 75Ah to 100Ah deep-cycle AGM or sealed lead-acid marine batteries (sold separately)

Checked 2026-11-08. Source for Battery compatibility (opens in a new tab)

Research notes & original documents