Manufacturer research Specifications checked 2026-11-16 US model

WaterBOB 100-Gallon Food-Grade Emergency Bathtub Water Containment Bladder

FDA food-grade LLDPE liner thickness, fill time before high-rise booster pumps drain (15–20 minutes), siphon hand-pump output, and single-use hygiene limits.

Maximum capacity
378 Liters (100 Gallons)
Filled total weight
~380 kg (835 lbs)
Liner material
BPA-Free FDA Food-Grade 12-Mil LLDPE
See all specifications and sources

Is it right for your household?

Where it fits

Stores up to 378 liters (100 gallons) of clean, sealed potable water inside a standard 150 cm (60-inch) bathtub—eliminating bathtub drain leakage and airborne dust/ash contamination.

When to consider another option

The WaterBOB is strictly a single-use emergency bladder. Because the narrow 5 cm fill port prevents thorough scrubbing and air-drying inside the collapsed film, moisture trapped inside after draining will breed biofilm and mold. Discard the liner after the emergency ends and replace it with a fresh sealed box.

More fit considerations

Other situations to consider

  • In multi-story apartments above the 4th floor, you must connect and fill the WaterBOB within the first 15 to 20 minutes of a blackout before upper-floor risers drain dry.
  • Single-use liner only: once drained, narrow fill collars cannot be sanitized internally without mold growth; keep two boxed units on hand for sequential storm seasons.

Other reasons to choose a different setup

  • Single-use liner only: once drained, narrow fill collars cannot be sanitized internally without mold growth; keep two boxed units on hand for sequential storm seasons.

Manufacturer specification record · No hands-on testing · Source records checked on 2026-11-16

Engineering overview and primary fit

The WaterBOB is a heavy-duty, FDA food-grade linear low-density polyethylene (LLDPE) bladder designed to turn any standard 150 cm (60-inch) alcove bathtub into a sealed 378-liter (100-gallon) drinking water reservoir in 20 minutes. Filling an unlined bathtub directly is a major mistake: rubber tub stoppers leak slowly over 6 to 12 hours, and exposed standing water collects soap residue, pet hair, and wildfire ash. For high-rise apartment residents, the WaterBOB's critical metric is fill timing: once a blackout cuts basement electric booster pumps, you have roughly 15 to 20 minutes to attach the fill collar to your tub spout and capture gravity-fed water draining down from upper-floor risers before your taps go dry.

Verified Hardware Specifications

Specification: WaterBOB 100-Gallon Data vs. Field Engineering Impact. Maximum Capacity: 378 Liters (100 Gallons) vs. Provides 14 days of drinking/hygiene water for 4 people (~2 gal/person/day). Filled Total Weight: ~380 kg (835 lbs) vs. Safe in standard alcove tubs (engineered for cast-iron tub + water + bather). Liner Material: BPA-Free FDA Food-Grade 12-Mil LLDPE vs. Thick multi-layer film resists abrasion against porcelain tub corners. Included Dispensing Gear: BPA-Free Plastic Hand Siphon Pump + Hose vs. Transfers water cleanly into 1-gallon pitchers without lifting. Boxed Storage Footprint: 25.4 x 20.3 x 7.6 cm (10" x 8" x 3") vs. Fits easily inside any bathroom vanity drawer.

Fast-Fill & Hygiene Protocol

1. Practice sliding the fill sleeve onto your tub faucet before an emergency: Standard tub spouts with top shower diverter pull-knobs fit easily inside the WaterBOB's elastic fill collar, whereas wide waterfall-style designer spouts may require holding the collar manually or using a short piece of clean garden hose. 2. Do not over-inflate past the tub rim: Stop filling once the bladder sits level with the top edge of the bathtub (~85 to 100 gallons); overfilling stresses the heat-welded perimeter seams. 3. Keep the bathroom door closed to block UV sunlight: Direct window sunlight on a clear bladder promotes algae growth within 5 to 7 days; keep the bathroom dark and cool (under 21°C / 70°F) to keep chlorinated municipal tap water fresh for up to 4 to 6 weeks.

Pre-Emergency Checklist

• Verify your apartment has a tub, not just a walk-in shower: Never fill a 100-gallon WaterBOB inside a fiberglass shower stall pan—fiberglass shower floors lack perimeter support and can crack under 380 kg (835 lbs) of hydraulic load. • Treat unchlorinated well water before sealing: If filling from a private well without municipal chlorine residual, add 1.5 teaspoons of unscented 6%–8.25% sodium hypochlorite bleach per 50 gallons while filling.

Specifications & sources

These are manufacturer specifications, not independent performance measurements. Source records checked on 2026-11-16. We have not tested this model hands-on.

Maximum capacity

378 Liters (100 Gallons)

Checked 2026-11-16. Source for Maximum capacity (opens in a new tab)

Filled total weight

~380 kg (835 lbs)

Checked 2026-11-16. Source for Filled total weight (opens in a new tab)

Liner material

BPA-Free FDA Food-Grade 12-Mil LLDPE

Checked 2026-11-16. Source for Liner material (opens in a new tab)

Included dispensing gear

BPA-Free Plastic Hand Siphon Pump + Hose

Checked 2026-11-16. Source for Included dispensing gear (opens in a new tab)

Boxed storage footprint

25.4 x 20.3 x 7.6 cm (10" x 8" x 3")

Checked 2026-11-16. Source for Boxed storage footprint (opens in a new tab)

Research notes & original documents