Manufacturer research Specifications checked 2026-11-16 US model

Farm Innovators Thermo Cube TC-3 Thermostatically Controlled Outlet (35°F On / 45°F Off)

Automatically turns plugged-in heaters, engine block heaters, and pipe cables ON at 2°C (35°F) and OFF at 7°C (45°F). Full 1,800W resistive vs. inductive load rules.

Cut in temperature on
2°C ± 2°C (35°F ± 4°F)
Cut out temperature off
7°C ± 2°C (45°F ± 4°F)
Electrical load rating
120V AC, 15 Amps, 1,800 Watts Max
See all specifications and sources

Is it right for your household?

Where it fits

Automatically energizes two grounded 120V outlets when ambient air drops below 2°C (35°F) and shuts power off once air warms above 7°C (45°F)—with zero programming or Wi-Fi required.

When to consider another option

The TC-3 measures ambient air temperature right at the wall outlet—not remote pipe temperature 6 meters away. If your wall outlet sits inside a warm heated garage while the pipe runs outside in -15°C (5°F) air, the TC-3 at the warm wall outlet will never turn on; mount the outlet inside the same cold thermal zone as the equipment it protects.

More fit considerations

Other situations to consider

  • Rated up to 1,800W (15 Amps @ 120V AC), making it ideal for automating vehicle engine block heaters, well-house heat lamps, and unswitched self-regulating pipe cables.
  • Only works with devices that resume automatically when power is applied (mechanical toggle switches)—will not turn on electronic heaters with digital soft-touch power buttons.

Other reasons to choose a different setup

  • Only works with devices that resume automatically when power is applied (mechanical toggle switches)—will not turn on electronic heaters with digital soft-touch power buttons.

Manufacturer specification record · No hands-on testing · Source records checked on 2026-11-16

Engineering overview and primary fit

The Farm Innovators Thermo Cube TC-3 is a solid-state, dual-outlet thermostatic adapter that plugs into any standard 120V grounded receptacle and automatically switches power ON whenever ambient air temperature drops below 2°C (35°F) and OFF once temperatures rise above 7°C (45°F). Requiring zero Wi-Fi, smartphone apps, or backup batteries, this 18 USD analog workhorse prevents well houses, crawlspaces, and vehicle engine blocks from freezing while cutting wasted daytime electricity bills by 60% to 75%.

Verified Hardware Specifications

Specification: Thermo Cube TC-3 Data vs. Field Engineering Impact. Cut-In Temperature (ON): 2°C ± 2°C (35°F ± 4°F) vs. Activates safely before standing water reaches 0°C (32°F). Cut-Out Temperature (OFF): 7°C ± 2°C (45°F ± 4°F) vs. Built-in 5°C (10°F) hysteresis band prevents rapid relay chattering. Electrical Load Rating: 120V AC, 15 Amps, 1,800 Watts Max vs. Handles a 1,000W block heater + 500W heat lamp simultaneously. Outlet Configuration: 2x Grounded 3-Prong NEMA 5-15R Receptacles vs. Both outlets switch simultaneously on the single thermistor. Operating Environment: Indoor / Protected Dry Outdoor Enclosure vs. Must be housed inside a weatherproof bubble cover if outdoors.

Best High-Leverage Winter Applications

1. Automating Vehicle Engine Block Heaters & Battery Blankets: Instead of running a 750W engine block heater for 12 hours overnight when temperatures sit at 6°C (43°F), plug your block heater cord into a TC-3 so power flows *only* when an overnight cold snap plunges below freezing. 2. Controlling Self-Regulating Pipe Heat Trace Cables: Self-regulating cables (such as Raychem FrostGuard) do not have built-in on/off thermostats and draw low trickle current even on mild autumn days. Plugging them into a TC-3 completely disconnects power above 7°C (45°F). 3. Well-House & Crawlspace Freeze Protection: Plug a caged ceramic heat emitter or incandescent work lamp (never glass heat bulbs near flammable insulation) into a TC-3 inside your well pump house to automatically hold the enclosure above freezing.

Compatibility & Safety Checklist

• Verify your connected device has a mechanical physical switch: The TC-3 works by cutting and restoring 120V wall power. It works with engine block heaters, heat cables, and analog milkhouse heaters with physical rocker switches—it will NOT start digital ceramic heaters that default to "Standby/Off" when plugged in. • Protect from direct rain/snow spray: The TC-3 is not waterproof; when used outdoors for vehicle block heaters, plug it into a recessed covered outlet or inside an in-use weatherproof outlet cover.

Specifications & sources

These are manufacturer specifications, not independent performance measurements. Source records checked on 2026-11-16. We have not tested this model hands-on.

Cut in temperature on

2°C ± 2°C (35°F ± 4°F)

Checked 2026-11-16. Source for Cut in temperature on (opens in a new tab)

Cut out temperature off

7°C ± 2°C (45°F ± 4°F)

Checked 2026-11-16. Source for Cut out temperature off (opens in a new tab)

Electrical load rating

120V AC, 15 Amps, 1,800 Watts Max

Checked 2026-11-16. Source for Electrical load rating (opens in a new tab)

Outlet configuration

2x Grounded 3-Prong NEMA 5-15R Receptacles

Checked 2026-11-16. Source for Outlet configuration (opens in a new tab)

Operating environment

Indoor / Protected Dry Outdoor Enclosure

Checked 2026-11-16. Source for Operating environment (opens in a new tab)

Research notes & original documents