Manufacturer research Specifications checked 2026-11-04 US model
Kidde Nighthawk CO & Explosive Gas Alarm
A UL 2034 / UL 1484 plug-in 3-in-1 digital alarm monitoring carbon monoxide (CO), natural gas (methane), and propane at 85 dB, backed by a 9 V alkaline battery for outage CO continuity.
- Gases detected
- Carbon Monoxide (CO), Natural Gas (Methane), and Propane
- Power source
- 120V AC plug-in with 9V alkaline battery backup
- Digital display
- Digital concentration readout (PPM for CO, % LEL for Gas)
Is it right for your household?
Utility rooms, basements, and kitchens containing gas furnaces, water heaters, stoves, or indoor propane lines.
Relying solely on this plug-in unit to detect propane or natural gas during a blackout — Kidde specifies that on 9 V battery backup, the KN-COEG-3 monitors CO only to conserve battery life.
More fit considerations
Other situations to consider
- Households needing an illuminated digital PPM / % LEL display so early low-level rises are visible before full alarm thresholds.
- Redundant lower-level monitoring paired with dedicated battery-powered CO alarms on bedroom ceilings.
Other reasons to choose a different setup
- Wall-outlet installation behind heavy drapes or furniture that blocks airflow past the sensor.
- Ignoring the 10-year sensor end-of-life replacement deadline.
Manufacturer specification record · No hands-on testing · Source records checked on 2026-11-04
Know what battery backup disables during an outage
While 120 V AC wall power runs both the electrochemical CO sensor and catalytic combustible-gas sensor (methane and propane), switching onto the 9 V alkaline backup battery disables explosive-gas detection to preserve emergency CO protection. Keep dedicated battery-powered CO detectors (such as AA units) on every sleeping floor.
Choose outlet height around methane vs. propane physics
Natural gas (methane) is lighter than air and rises toward ceilings, whereas propane settles near floors. Follow Kidde's mounting manual when selecting a hallway or utility outlet, never block the intake vents, and log the installation date for mandatory 10-year sensor replacement.
Specifications & sources
These are manufacturer specifications, not independent performance measurements. Source records checked on 2026-11-04. We have not tested this model hands-on.
- Gases detected
-
Carbon Monoxide (CO), Natural Gas (Methane), and Propane
3-in-1 life safety environmental protection.
Checked 2026-11-04. Source for Gases detected (opens in a new tab)
- Power source
-
120V AC plug-in with 9V alkaline battery backup
Ensures continuous sensing during grid power outages.
Checked 2026-11-04. Source for Power source (opens in a new tab)
- Digital display
-
Digital concentration readout (PPM for CO, % LEL for Gas)
Updates every 15 seconds to display peak and current hazard levels.
Checked 2026-11-04. Source for Digital display (opens in a new tab)
- Alarm volume
-
85 dBA
85 dB at 10 feet with distinct alarm sound patterns for gas vs CO.
Checked 2026-11-04. Source for Alarm volume (opens in a new tab)
- Certification
-
UL 2034 (CO) and UL 1484 (Combustible Gas)
Rigorous safety standard certification.
Checked 2026-11-04. Source for Certification (opens in a new tab)